Heating Instructions:

1. To melt/soften the wax either
2. Remove wax from tray, place tray upside down on the floor, then step on the until it pops, then peel away the label. This should make it easy to remove the wax from packaging.
3. Place wax into the metal insert of the wax heater.
4. Regulate heater to a medium setting between dial 3 - 4 on a Caronlab Professional Wax Heater.
5. Once wax has softened at the correct temperature, wax should sit on the end of the applicator and be practically dripless i.e. approx 65°C-75°C (149°F-167°F).if wax is moving, its too hot. its no necessary to melt down wax completely - a core in the centre is ideal.

How to use Instructions:

1. Area to be treated must be clean, dry and free from any oils and creams. Use Caronlab Pre Wax Skin Cleanser. Always test wax on the inside of your wrist before use. Do not apply on warts, moles and broken or irritated skin.

2. Begin by dipping applicator into wax, which should be the consistency of honey. Use melted wax from arount the core.

3. Apply wax in the same direction as hair growth, leaving one edge thicker to create a lip.

4. Hold skin taut with one hand and remove the wax by pulling it off in the opposite direction.

5. For the perfect finish and to remove any wax residue on the skin, we recommend you use Caronlab After Wax Skin Cleanser or After Wax Soothing Lotion. To clean equipment use Caronlab Wax Remover Citrus Clean.

Important: Store in a cool, dry place. In hot climates over 20°C we recommend you freeze or refrigerate for approximately 1 - 2 minutes before opening

Warning: This is a professional product for salon use. Read all instructions on packaging before use. Patch test before use. If skin irritation occurs, cease use. Exceeding recommended heating instructions may cause burns and/or injury.