CaronLab Professional Paraffin Wax Warmer Bath - 4 Litre

Deliver deep, intensive cellular hydration, targeted thermal skin conditioning, and soothing muscular relaxation with the premium CaronLab Professional Paraffin Wax Warmer Bath. Purpose-built for high-volume beauty therapy, specialized podiatry clinics, and professional salon environments, this elite workstation features advanced thermostatic heating to maintain paraffin at the perfect treatment consistency. If your current paraffin heater suffers from erratic temperature spikes, takes too long to melt down raw blocks, or has a cramped basin that restricts full immersion, this high-performance heating system guarantees consistent, safe, and ultra-hygienic thermal therapy from the moment your salon opens.

Engineered to satisfy the rigorous daily demands of busy professional salons, this high-capacity 4-litre bath features a wide, ergonomic design optimized for the comfortable immersion of hands, wrists, elbows, and feet. Equipped with an advanced digital control interface, an automated motorized lid system, and intelligent automatic temperature regulation, it completely eliminates the risks of scorching or localized overheating. The premium non-stick aluminium inner core maximizes thermal transfer efficiency, drastically accelerating melting times while offering a highly resilient, chemical-resistant surface that stands up to continuous everyday use.

Professional Salon Tip: To deliver a premium, deeply hydrating skin treatment, always cleanse and sanitize the client's hands or feet thoroughly before immersion. Turn the heater on well in advance, initial melting from solid blocks can take 4 to 6 hours, while remelting solid wax takes about 1.5 to 2 hours. To speed up the initial melting process, temporarily remove the protective floor grille so the wax sits flush against the base, and make sure to replace it once the wax is fully liquefied. Always check the digital read-out and test a tiny drop of wax on your own wrist to verify comfort before submerging your client. Submerge the target area 3 to 5 times to build a thick, insulating glove, then slide on a plastic liner followed by the included insulated cotton mitts to trap the therapeutic heat for 10 to 15 minutes.

Who is this Product Suitable For:

• Professional Salon Therapists: A high-performance, high-capacity basin engineered for repeated everyday use in beauty salons, spas, and podiatry clinics.
• Intensive Skin Conditioning: Ideal for treating clients struggling with chronically dry, cracked, or weather-worn skin on their hands, feet, and elbows.
• Therapeutic Heat Relief: Perfect for clients seeking localized thermal relief to soothe stiff joints, aching muscles, or arthritis symptoms.

IMPORTANT SAFETY INSTRUCTIONS:

When using the Paraffin Bath basic safety precautions should be followed, including the following:

WARNING: To reduce the risk of burns, electric shock, fire or injury to persons:

Read all instructions before using the appliance and keep for future reference.

1. Use this appliance only for its intended use as described in this manual.
2. Do NOT use corrosive chemicals or vapours in this appliance.
3. Do NOT operate the Paraffin Bath when empty.
4. Do NOT operate this appliance if it has a damaged cord or plug, if it is not working properly or if it has been damaged or dropped. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
5. Keep out of reach of children.
6. Close supervision is required when this appliance is in use.
7. Always use on a flat surface.
8. Do NOT place or store near water.
9. Do NOT submerge in water.
10. If the appliance falls into water, do NOT reach into the water and unplug the unit immediately.
11. Do NOT wrap the cord around the appliance when in use.
12. Always test the temperature of the Wax to avoid burns.
13. Always unplug the machine after use, allowing it to cool before handling, cleaning and storing.
14. Turn off at power source after last use of the day.
15. Do not heat for more than 12 hours.

OPERATING INSTRUCTIONS:

1. Remove the Paraffin Bath from packaging and place on a flat surface.
2. Plug the Paraffin Bath into a power socket. The unit will make a beeping sound and the display screen will show —-.
3. Press the open/close button and the lid will automatically open. Fill the aluminium bath with the required amount of paraffin Wax then press the open/close button again to close the lid.
4. Press the power button to turn the machine on and select one of the three (3) pre-set modes.
5. Turn off at power source after last use of the day.
6. Do not heat for more than 12 hours.

Manual Temperature Setting:

1. Press the power button.
2. Set the temperature by pressing the or
3. The display screen will show the current temperature.

Automatic Heating:

1. Select your heating mode by pressing the time button and using the and button to set the desired heating time based on the below guideline.

The machine will start heating after three (3) seconds. The display screen will show the countdown of heating time.

2. Once the Wax has been heated, the lid will automatically open to cool down the Wax. The display screen will show the current Wax temperature.
3. When the Wax has cooled to 52˚C the machine will continuously beep three (3) times indicating it has reached optimal temperature for use.

Heat Delay Mode:

1. Press the time button for three (3) seconds.
2. Press the and buttons to set the duration of time.

NOTE time adjustments can only be made in hourly increments.

Do not heat for more than 12 hours.

3. Display screen will show the countdown to heating time at which point the machine will heat up to 70˚C.
4. Once the Wax has been heated, the lid will automatically open to cool down the Wax. The display screen will show the current Wax temperature.

CLEANING AND CARE:

Please dispose of unused Wax carefully and wipe clean.